IFP Puro, Carbonit Monoblock by Carbonit®

The stated list price refers to the manufacturer's RRP.

The IFP Puro combines the unique properties of a sintered Carbonit® monoblock with 0.15 µm microfiltration provided by the internal Ster-O-Tap® capillary membrane. Even high concentrations of pollutants that could accumulate in the organism are reliably filtered out. The IFP Puro filter cartridge has a high flow rate of 6–8 liters per minute, making it suitable for use with water vortexers. It is ideal for low line pressure. The Ster-O-Tap® capillary membrane is tested according to ANSI/NSF Standard 42 (Particulate Reduction Class 1) and ANSI/NSF Standard 53 (Cyst and Turbidity Reduction). The dimensions and seals of the IFP Puro comply with standard industry norms. For the filtration of bacteria and organic substances.

Service life:
The filter cartridge must be replaced after 6 months. In principle, approximately 5,000 liters of water can be filtered within these 6 months. An earlier replacement may be necessary if the water flow is noticeably reduced. A premature replacement is not a defect in the filter cartridge, but rather an indication of an increased occurrence of fine particles in the unfiltered water.

Filter fineness:
approx. 0.15 µm

Flow rate:
approx. 6-8 liters per minute (depending on the filter housing used and line pressure)


Temperature:
For technical reasons, use only with cold water up to a maximum of 26°C; protect from frost.

CARBONIT® Monoblock filter cartridge IFP Puro
suitable for SANUNO - VARIO - DUO devices.

Use in many standard commercially available housings is possible due to the standardized dimensions of the filter cartridge.

CARBONIT® Monoblock – baked block filter produced via a
sintering process, internationally patented, multiple award-winning, and
scientifically recognized. (Not to be confused with loose fillings
of granulated carbon or extruded blocks).

Sterile (bacteria-free) water via Carbonit Monoblock IFP Puro
(Dual Stage Pro) with a 0.15 µm absolute microfiltration membrane
(STER-O-TAP with log 8 reduction). Standardized 9 3/4" element with
flat gaskets and integrated O-ring (SOE). Especially suitable for low water pressure. Filtration capacity of approx. 5,000 liters. Internationally patented filter composition. Meets ANSI/NSF Standard 53 (cyst & turbidity reduction) and EPA Standard. The epdwa guidelines for a filter fineness of at least 1 micron (1 µm) nominal and a recommended filter change every 6 months are also met. Everything for your safety!

The replacement cartridge is packaged in a handy individual box.

For technical reasons, use is only permitted with cold water up to a maximum of 28 degrees Celsius; protect from frost. Recommended filter change every 6 months.

Only original CARBONIT replacement cartridges offer a performance guarantee and the peace of mind of using high-quality, monitored products.

Manufacturer and EU Responsible Party

CARBONIT Filtertechnik GmbH
Industriestraße 2
29410 Salzwedel / OT Dambeck
Germany
+49 (0) 39 035‑955‑0
carbonit@westa.net