PI-Power-Compact 300 Plus Direct Flow Osmosis + Glyphosate Filter Set

PI®-Power-Compact 300 Plus, Direct-Flow Osmosis System, max. 1.8 liters/minute
with integrated glyphosate filter set

We offer the lowest price; if you find a lower price elsewhere, we will beat it by 10 EUR. The strike-through price refers to the manufacturer's RRP.

Unique direct-flow osmosis system without a storage tank. For fast and convenient drinking water filtration. Additionally includes a PI®-Cell-Vitalizer for mineralization and energization of the filtered water. Manufactured in the European Union.

• Living water with the quality of the best spring waters
• Highest rejection rates for impurities (97.5% - 99%)
• Very fast water filtration directly from the cold water line
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of bacterial contamination by avoiding a water tank (stagnant water)
• Continuous membrane flushing and water-cooled pump (no thermal problems)
• Space-saving and compact design with indicator lights for safe operation
• Low maintenance and follow-up costs thanks to long-lasting membranes
• Free 3-liter sample of PI®-water available to order

 

The PI®-POWER Compact 300 Plus model is particularly well-suited for the following applications:

• Large households
• Catering businesses
• Large medical practices and small clinics

 

Follow-up costs (as of 2019):

• Pre-filter set: Change every 6 months (38.40 Euro)
• Membrane set: Change every 2 years (184.00 Euro)
• PI®-Cell Vitalizer: Change every 6-10 years (816.00 Euro)
• Glyphosate replacement filter: Change every 6 months (119.00 Euro)

 

Scope of delivery: The osmosis system is supplied completely ready for connection. It consists of the under-sink system that filters the water and the PI®-Cell-Vitalizer, which mineralizes and energizes the filtered water. The delivery specifically includes the following components:

• PI®-Power-Compact 300 Plus
• PI®-Cell-Vitalizer SPECIAL
• The glyphosate combination set, consisting of two housings incl. Antiglyphosat® filters.
  Prepared for easy assembly. The set just needs to be connected,
  filters are already installed in the housings.
  The double filters are always to be connected in series AFTER the reverse osmosis (see also illustration)
• Dispensing tap (3-way faucet available upon request at an additional cost)
• T-piece with pressure gauge and pressure reducer (for connection to the angle valve)
• Water stop for leak monitoring
• Connection set with small parts

 

Free sample: A sample of the water can be ordered for free.

Materials used: All materials used are high-quality and free of harmful substances. The housing of the system and the vitalizer is made of stainless steel. All plastic parts used are guaranteed to be free of so-called plasticizers (phthalates), bisphenol A (hormones), as well as acetaldehyde and antimony.

Requirements for input water (before reverse osmosis)
1. The input water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (sum of all dissolved substances) must be below 600 ppm (1200 µS) (for values above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening)

 

Technical data for osmosis system:

• Operating voltage: 220-240V AC
• Capacity: 3.4 to 3.8 liters/minute
• Input water: Temperature 4-40°C, water pressure min. 1.7 bar
• Pure water: 55% pure water corresponds to 1.8 to 2.0 liters/minute
• Wastewater: 45% wastewater corresponds to 1.6 to 1.8 liters/minute
• Osmosis membrane: 2 pieces 150 GPD reverse osmosis membrane
• Pre-filter: 1 piece sediment filter, 1 piece activated carbon filter
• Dimensions (H/W/D): Upright installation 430x110x410mm, horizontal installation 110x430x410mm
• Housing: Stainless steel

 

Technical data PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Stand part: Duracon
• Cartridge: Polypropylene
• Weight: 2.9kg
• Dimensions: Diameter 130mm, height 370mm

 

IMPORTANT INFORMATION

 

Inspecting the goods: Please check your system, replacement filters, or spare parts immediately upon receipt for transport damage. Remove the cover of your system to check the internal components as well.

 

Commissioning: The system must be connected and put into operation within a maximum of 7 days to avoid potential bacterial contamination. When installing the system, please be sure to follow the flushing times specified in the installation instructions (reverse osmosis 20 min., entire system incl. PI-Cell Vitalizer an additional 20 min.). The pre-filters can be stored in their original packaging for up to 3 years.

 

Installation: You can watch the installation step-by-step at the following link.

https://pi-power-compact.com/de/installation

Warranty: You receive a 2-year warranty on your PI-Power Compact model. Please keep the original packaging and instruction manual! If lost, the special packaging can be reordered for a fee.