PI-Power-Compact 300 UV-Plus Directflow reverse osmosis, UV-LED, glyphosate filter set

PI®-Power-Compact 300 UV-Plus, Direct-Flow Osmosis System, max. 2.0 liters/minute
with integrated glyphosate filter set, with integrated UV-LED lighting unit

Cheapest price guaranteed; if you see a lower price elsewhere, we will beat it by 10 EUR. The crossed-out price refers to the manufacturer's RRP.

Unique direct-flow osmosis system without a storage tank. For fast and convenient drinking water filtration. Additionally includes a PI®-Cell-Vitalizer for mineralization and energization of the filtered water. Manufactured in the European Union.

 

• Living water with the quality of the best spring waters
• Highest rejection rates for impurities (97.5% - 99%)
• Very fast water filtration directly from the cold water line
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of microbial contamination by avoiding a water tank (stagnant water)
• Continuous membrane flushing and water-cooled pump (no thermal issues)
• Space-saving and compact design with control indicators for safe operation
• Low maintenance and follow-up costs thanks to long-lasting membranes
• Free 3-liter sample of PI®-water available to order from us

 

The PI®-POWER Compact Plus model is particularly suitable for the following applications:

• Large households
• Catering businesses
• Large medical practices and small clinics

 

Follow-up costs (as of 2017):

• Pre-filter set: Change every 6 months (38.40 Euro)
• Membrane set: Change every 2 years (184.00 Euro)
• PI®-Cell Vitalizer: Change every 6-10 years (816.00 Euro)
• Glyphosate replacement filter: Change every 6 months (119.00 Euro)

 

Scope of delivery: The osmosis system is delivered completely ready for connection. It consists of the under-sink unit, which filters the water, and the PI®-Cell-Vitalizer, which mineralizes and energizes the filtered water. The following components are included in the scope of delivery:

• PI®-Power-Compact 300 Plus
• PI®-Cell-Vitalizer SPECIAL
• UV-LED lamp, installed immediately before the vitalizer/after the membranes (see illustration)
• The glyphosate combination set, consisting of two housings incl. Antiglyphosat® filters.
  Prepared for easy installation. The set only needs to be connected;
  filters are already installed in the housings.
  The double filters must always be connected in series AFTER the reverse osmosis (see illustration)
• Dispensing tap (3-way faucet available upon request for an extra charge)
• T-piece with pressure gauge and pressure reducer (for connection to the angle valve)
• Water stop for leak monitoring
• Connection set with small parts

 

Free water sample: A sample of the water can be ordered from us free of charge.

Materials used: All materials used are high-quality and free of harmful substances. The housing of the unit and the vitalizer is made of stainless steel. All plastic parts used are guaranteed to be free of so-called plasticizers (phthalates), bisphenol A (hormones), as well as acetaldehyde and antimony.

Requirements for the input water (before reverse osmosis)
1. The input water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (sum of all dissolved substances) must be below 600 ppm (1200 µS) (for values above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information regarding pre-softening)

 

Technical data osmosis system:

• Operating voltage: 220-240V AC
• Capacity: 3.4 to 3.8 liters/minute
• Input water: temperature 4-40°C, water pressure min. 1.7 bar
• Purified water: 55% purified water corresponds to 1.8 to 2.0 liters/minute
• Wastewater: 45% wastewater corresponds to 1.6 to 1.8 liters/minute
• Osmosis membrane: 2 units 150 GPD reverse osmosis membranes
• Pre-filter: 1 unit sediment filter, 1 unit activated carbon filter
• Dimensions (H/W/D): Upright installation 430x110x410mm, lying installation 110x430x410mm
• Housing: Stainless steel

 

Technical data PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Component: Duracon
• Cartridge: Polypropylene
• Weight: 2.9kg
• Dimensions: Diameter 130mm, height 370mm

 

IMPORTANT INFORMATION

 

Checking the goods: Please check your unit, replacement filters, or spare parts immediately upon receipt for transport damage. For this purpose, also remove the cover of your unit to check the internal components.

 

 

Commissioning: The unit must be connected and put into operation within a maximum of 7 days to avoid possible bacterial growth. When installing the unit, please be sure to follow the flushing times listed in the installation manual (reverse osmosis 20 min., entire system incl. PI-Cell Vitalizer an additional 20 min.). The pre-filters can be stored in their original packaging for up to 3 years.

 

 

Installation: You can view the step-by-step installation at the following link.

https://pi-power-compact.com/de/installation

 

Warranty: You receive a 2-year warranty on your PI-Power Compact model. Please keep the original packaging and instruction manual for this purpose! In case of loss, the special packaging can be reordered for a fee.